 |
 |
 |
| |||||
 Exhaust
Stacks Exhaust
flange welded to a short stub that is swagedto
fit into any of the other components below.Product
codes ending with an 'i' are angled 30 degrees.Product
codes without an 'i' are straight. |  | ||||
Part
# | Description | Price | |||
KS1448i | Fits
3W 24i, 28i, 48B2, 56B2 22mm
Output | $
21.00 | |||
KS1448 | Fits
3W 24i, 28i, 48B2, 56B222mm
Output | $
21.00 | |||
KS1564 | Fits
3W 35, 40, 70B2, 80B2, 140B4, 160B425mm
Output | $
25.00 | |||
KS1564i | Fits
3W 38i, 42i, 50i, 85B2, 100B2, 106B225mm
Output | $
25.00 | |||
KS1555i
|
Fits
3W 60i, 65i, 70/75i, 70/75iUS, 80/85xi120,
140, 150, 157, 170, 3W 60K, 60L25mm
Output | $
25.00 | |||
KS1555 | Fits
3W 60K, 60L, 120B2 (Old)25mm
Output |
$
25.00 | |||
KS1755i
|
Fits
3W 60i, 65i, 70/75i, 70/75iUS, 80/85xi120,
140, 150, 157, 17028mm
Output | $
25.00 | |||
KS1556 | Fits BME 110 - 25mm Output | $
25.00 | |||
KS1721i | Fits
3W 200, 240, 27528mm
Output | $
27.00 | |||
KS1551 |
Fits Moki 45, BFM 45,
ZG 80B2, Mokie 45 ccm rear-outlet25mm
Output |
$
25.00 | |||
KS1770 |
Fits DA 15028mm
Output |
$
25.00 | |||
| |||||
| 90
Degree BendsMay
be used as a right angle bend or cut to any angle you needSwaged
on one end |  | ||||
Part
# | Description | Price | |||
KS1450 | 90 Deg Bend x 22mm Dia. | $
9.00 | |||
KS1525 | 90 Deg Bend x 25mm Dia. | $
9.00 | |||
KS1750 | 90 Deg Bend x 28mm Dia. | $
11.00 | |||
| |||||
| Straight
Tube - Short (60mm)Swaged
on one end |  | ||||
Part
# | Description | Price | |||
KS1410 | Short Straight Tube 60mm x 22mm Dia. | $
5.00 | |||
KS1520 | Short Straight Tube 60mm x 25mm Dia. | $
5.00 | |||
KS1710 | Short Straight Tube 60mm x 28mm Dia. | $
6.00 | |||
| |||||
| Straight
Tube - Long (200mm)Swaged
on one end |  | ||||
Part
# | Description | Price | |||
KS1452 | Long Straight Tube 200mm x 22mm Dia. | $
8.00 | |||
KS1552 | Long Straight Tube 200mm x 25mm Dia. | $
8.00 | |||
KS1752
| Long Straight Tube 200mm x 28mm Dia. | $
10.00 | |||
| |||||
| Flex
Tube - Long (200mm)Makes
slight offsets and mild curves easier |  | ||||
Part
# | Description | Price | |||
KS965 | Flex Tube 200mm x 23mm Inside Dia. | $
20.00 | |||
KS975 | Flex Tube 200mm x 25mm Inside Dia. | $
20.00 | |||
KS980 | Flex Tube 200mm x 28mm Inside Dia. | $
25.00 | |||
KS985 | Flex Tube 200mm x 30mm Inside Dia. | $
27.00 | |||
| |||||
| "L"
Tube90
Degree, pre-formed, seamless, "L" shaped tubeSimply
add an exhaust stack to create a headerwith
any drop distance that suits your needs |  | ||||
Part
# | Description | Price | |||
KS4322 | Pre-Formed "L" Tube 22mm dia. | $
19.00 | |||
KS4325 | Pre-Formed "L" Tube 25mm dia. | $
22.00 | |||
KS4328
| Pre-Formed "L" Tube 28mm dia. | $
25.00 | |||
| |||||
| Double
Bend TubePre-formed,
seamless, double bend tubeUsed
to place tuned pipes or canisters more inline with the cylinderSimply
add an exhaust stack to create a double bend headerwith
any drop distance that suits your needs |  | ||||
Part
# | Description | Price | |||
KS4365 | Pre-Formed Double Bend Tube 22mm dia. | $
20.00 | |||
KS4375 | Pre-Formed Double Bend Tube 25mm dia. | $
23.00 | |||
KS4378 | Pre-Formed Double Bend Tube 28mm dia. | $
26.00 | |||
| |||||
| Flexible "L"
Tube90
Degree, pre-formed, seamless, "L" shaped tube with flex insert Simply add an exhaust stack to create a headerwith
any drop distance that suits your needs |
 |
||||
Part
# |
Description |
Price |
|||
KS4825 |
Pre-Formed "L" Tube 25mm dia. | $
49.00 |
|||
|
|||||
| Flexible
Double Bend TubePre-formed,
seamless, double bend tube with flex insertUsed
to place tuned pipes or canisters more inline with the cylinderSimply
add an exhaust stack to create a double bend headerwith
any drop distance that suits your needs |  | ||||
Part
# | Description | Price | |||
KS4865 | Pre-Formed, Flexible, Double Bend Tube 22mm dia. | $
59.00 | |||
KS4875 | Pre-Formed, Flexible, Double Bend Tube 25mm dia. | $
65.00 | |||
KS4878 | Pre-Formed, Flexible, Double Bend Tube 28mm dia. | $
75.00 | |||
| |||||
| Welding
Rod Pre-fluxed
rods are designed to be used with MAPP gas torchor
similar hotter-than-propane method. | |||||
Part
# | Description | Price | |||
KS1345-S | Silver
Solder "Welding Rod" - Approx 18" Silver Solder w/Flux - 45% Silver - 1.5mm Diam. | $
7.50 | |||
| |||||
| Teflon
Couplers Used
to connect tuned canisters and tuned pipes to the headersUse
with our tensioned steel spring clamps listed below |  | ||||
Part
# | Description | Price | |||
3WCPL220 | 3W Teflon Coupler - 22mm (Fits 3W-24, 28, 48B2, 56B2) | $
10.00 | |||
3WCPL245 | 3W Teflon Coupler - 24.5mm (Fits 3W-60 to 150 & 212) | $
12.00 | |||
3WCPL280 | 3W Teflon Coupler - 28mm (Fits 3W-200) | $
15.00 | |||
3WCPL300 | 3W Teflon Coupler - 30mm (Fits 3W-240 & 275) | $
18.00 | |||
3WCPL350 | 3W Teflon Coupler - 35mm (Fits 3W-342 & 684) | $
20.00 | |||
KS1026 | KS Teflon Coupler - 25mm (Fits 3W-60 to 170 & 212) | $
12.00 | |||
KS1026L | KS Teflon Coupler - 25mm x 200mm Long | $
30.00 | |||
KS1028RE | KS Teflon Step-Up Coupler - 28mm to 30mm |
| $
15.00 | ||
| |||||
| Tensioned
Steel Spring Clamps |  | ||||
Part
# | Description | Price | |||
3WCLAMP22 | 3W Tensioned Steel Spring Clamp - 22mm | $
2.50 | |||
3WCLAMP25 | 3W Tensioned Steel Spring Clamp - 25mm | $
2.50 | |||
3WCLAMP30 | 3W Tensioned Steel Spring Clamp - 28 to 30mm | $
3.00 | |||
3WCLAMP35 | 3W Tensioned Steel Spring Clamp - 35mm | $
5.00 | |||
| |||||
| Copyright
2004 - Aircraft International, Inc. - Prices Subject To Change Without Notice | |||||
